So I have the dbxl gasser and I just added a 22t pinion heat by vertigo along with clutch bell plus a losi 62t spur. Now I’m unable to properly set the mesh even tho I brought the 22t inserts but they are for the losi 5t. What can I do?? Thank you in advance I’m dying to take her out
DBXL 2.0 Gearing for dbxl 2.0
- Thread starter Dbxljav
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 7,113
- Location
- Nj
Get rid of the inserts and use button head screws and manually adjust the mesh.
Also is this a 1.0 or 2.0 dbxl?
Also is this a 1.0 or 2.0 dbxl?
- Thread starter
- #3
- Messages
- 7,113
- Location
- Nj
Ok, for future reference just make sure to use the correct sub model tab so
As I said above use button head screws and ditch the inserts. I have a 5ive-t 2.0 and I no longer use the inserts. It's faster and also cheaper.
As I said above use button head screws and ditch the inserts. I have a 5ive-t 2.0 and I no longer use the inserts. It's faster and also cheaper.